|

| CHARTSIL: SOLID PERFORMANCE |
Chartwell Adhesion Promotors
CHARTWELL (liquid)/ 72% + HiSil ABS
Precip Silica/ 28% = CHARTSIL (Solid)
|
Chartsil
|
Functionality
|
Application
|
|
B-505.1/2H
|
mercapto
|
All sufur
cured rubber (SBR, etc)* Epoxy, Urethane powder coating* |
|
B-515.1/2H**
C-515.71HR
|
amino
|
Epoxy powder
coating*
EPDM, Nylon, urethane |
|
C-523.2H
|
carboxy/
hydroxy
|
TGIC Polyester
powder coating* |
|
B-525.1
|
carboxy
|
Polyester
powder coating* |
|
C-531.1
|
C-10
carboxy
|
Acrylic,
TGIC polyester powder |
|
B-600
|
sulfido
|
All
sulfur cured rubber
Improved abrasion resistance |
*Improved corrosion
resistance, reduced creep at the scribe
**Recommend increased active matter grades designated "H"
or "2H" |
| CHARTSIL:
Use Procedure Considerations |
|
1.
|
Liquid Chartwell is largely in pores of silica,
not on the exterior of the Chartsil particle.
|
| 2. |
Liquid Chartwell has high surface
tension. For liquid to be released and pass into the powder coating
system, the silica carrier must be crushed. |
| 3. |
Set extruder for maximum shear and maximum
torque.* |
| 4. |
Recommended use level is 0.5 - 1.0
phr. (2H), 1.0-1.4 phr. (H), and 1.4-2.8 phr. (others) |
|
-(CH
2) x SH, X<6
|
B-505.1
|
|
-(CH
2) xNH2, x<4
|
B-515.1
|
|
-CH(OH)-CH(OH)-COOH
|
C-523.2
|
|
-(CH2)xCOOH,
X=4-6
|
B-525.1
|
|
-(CH2)xCOOH,
x>10
|
C-531.1
|
|
1. Powder Coatings
Improved corrosion resistance (salt fog), reduced
creep at the scribe.
2. Rubber
Improved adhesion
Improved abrasion resistance
Improved tensile and tear strengths
*Alternatively premix Chartsil with
resin/ pigments in a high shear mixture, ie Henschel, Banbury
or similar. Add premix to extruder and compound as usual.
|
Liquid Adhesion Promoter distributed within silica
pores:
High shear/ high torque = success with Chartsil
(topof page)
|
Chartwell International, Inc.
100 John Dietsch Blvd.
North Attleboro, MA 02763
info@chartwellintl.com
Tel: (508)695-1690
Fax: (508)699 -6693
|
|
|
|