Home  About Chartwell Site Map  Chemistry  What's Hot  Product Properties  Product Performance   Chartsil Products   FAQs  Product Bulletins  Samples  Agents/Distributors  Contact Us


CHARTWELL ADHESION PROMOTERS

PRODUCT APPLICATIONS

RECOMMENDATIONS BY POLYMER

  Also see these pages:

Chartsil 

   Use Levels

 Silane Cross Reference

   Use Procedures
  Organoreactive Groups

Key Procedures - Low Use Levels

  Critical Procedures for SB Systems

NOTE: Product selection generally depends upon polymer in coating, ink, rubber, adhesive (or plastic) and NOT ON SUBSTRATE to which these are being applied.

For specific information on the Chartwell product you need, see our Product Bulletin page.
or print this page from a pdf file

ALKYD
Solvent-borne: B-515.4HR, C-523.2H, C-515.71HR, C-515.72HR; also D-525.3, D-531.1
Uses: Coatings for various metals.
Water-Borne: B-523.6WH, C-515.71/1.5H; also B-515.4, B-515.5W, B-516.5, B-516.5W

ACRYLIC
Solvent-borne: C-523.2H, also D-531.1
Uses: Coatings for various metals.
Water-Borne: B-515.71W, B-515.71WM, C-515.71/ 1.5H, C-515.71HR, C-515.72HR;  also B-515.5W, B-516.5W
Uses: DTM, primer coatings on metals; B-515.71W for coating/ adhesive on plastic film

EPDM
Sulfur-Cured: B-505.1; also B-505.6
Uses: Roof membranes, general automotive
Metal Oxide Cured: B-515.1/ 2H, C-515.71/ 1.5H; also B-516.5, E-515.2H

EPOXY
2K: C-515.71HR* & C-515.71/ 1.5H*, C-515.72HR, B-515.1/ 2H; also E-515.2H, B-517.4
*Preferred recommendations
Water-Borne: C-515.71/ 1.5H, C-515.71HR, B-515.5W; also B-516.5W
Uses: Metal primers, adhesives, electronic encapsulants, flooring

METHACRYLATE
C-515.72HR, C-515.71HR, B-545.1; also B-515.1/ 2H, B-516.5

NATURAL RUBBER
B-505.1, C-505.1/ 2H; also B-505.6
Uses: Shoe Soles

NEOPRENE
Rubber: B-515.1/ 2H, C-515.71/ 1.5H, B-516.5, also C-515.71HR
Uses: Adhesives, molded rubber articles
Solvent-Borne: C-515.71/ 1.5H, B-515.1/ 2H, B-516.5
Water-Borne: B-600.6, C-515.71/ 1.5H

NITRILE RUBBER

B-505.1, B-505.6, C-505.1/ 2H; also B-600, B-600.6
Uses: Industrial process rolls, shoe soles

PHENOLIC

B-515.1/ 2H, C-515.71HR
Uses: Industrial abrasive wheels; adhesion to glass

POLYESTER/ MELAMINE
D-525.3, D-525.31, D-531.1
Uses: Coil coatings, general metal finishing

POLYESTER
Unsaturated:B-545.1, C-515.71HR, C-515.72HR; also D-531.1, D-535.1
Pigment dispersions: B-535.1, D-535.1
SMC/ BMC: D-531.1, B-545.1 for improved physical properties

POLYOLEFINS
D-535.1 For pigment dispersions & mineral filler treatment

POLYURETHANE
2K: D-525.3, C-515.71HR, C-515.72HR, C-515.71/1.5H; also B-515.4HR, B-516.5
Add to polyol side (B) at 0.35 – 2.0 phr based upon total Side A + Side B
WB: B-515.71W, C-515.71/ 1.5H, B-515.1WHM, C-515.71HR, B-516.5W; also B-515.4W, B-515.5W, B-516.5
Uses: Metal primersp; plastic coatings

POLYVINYL ACETATE
B-515.1WH, B-523.2W, B-515.71W; also B-523.2WX
Uses: Adhesives, sealants, WB coatings

POLYVINYLIDENE Chloride
B-515.1WH, B-523.2W; also B-523.2WX
Uses:  Anti-corrosive primers

SBR
Rubber: B-505.1, C-505.1/ 2H; also B-505.6, B-600
Uses: Shoe soles, rubber adhesives
Latex: C-515.71HR, C-515.72HR; also B-505.6, B-600.6

STYRENATED ACRYLIC
B-515.71W, C-515.71/ 1.5H, C-515.71HR; also B-515.5W, B-516.5; B-516.5W
Uses: Primers, DTM coatings. B-515.71W useful for adhesion to EPDM roof membrane, plastic film

 


Home  About Chartwell Site Map  Chemistry  What's Hot   Product Properties  Product Performance  Chartsil Products   FAQs  Product Bulletins  Samples  Agents/Distributors  Contact Us

Chartwell International, Inc.
100 John Dietsch Blvd.
North Attleboro, MA 02763
info@chartwellintl.com

Tel: (508)695-1690
Fax: (508)699-6693